![Phillips Machine Screws](https://staging2.optimas.com/wp-content/uploads/2022/09/Phillips-Machine-Screws.jpg)
Optimas Parts Imperial Blog Series: Technical Insight Into Phillips Machine Screws
Optimas designed the Parts Imperial Blog Series to provide detailed information about the fasteners you use and the ones you may need. Curated to help you find the right parts, these technical releases supply information on components’ specifications, applications and standards. In this blog, we will focus on Phillips machine screws.
Phillips Machine Screws
Phillips machine screws are designed to hold metal components together and have a specified minimum tensile strength of 60,000 psi. They are designed to be used with a mating machine screw nut, a standard hex nut of Grade 2 or higher strength, or a mating tapped thread. The threads are Class 2A thread fit and thread length is 1” minimum for diameters up to #5 included and 1-1/2” minimum for all sizes #6 and larger.
The Phillips drive allows installation and removal with a mating Phillips driver bit. This recess is prone to the driver bit slipping out of the recess by design to help prevent over-torqueing of the fastener. The Phillips drive provides serviceability with common tools. The small head diameter allows this screw to fit into tight spaces.
Specification Resources
Dimensional and material requirements are controlled by ASME B18.6.3. This type of fastener is generally available in sizes #4 through 1/2” diameter and length as shown in the table below. Other lengths are possible.
Phillips Fillister Head Machine Screw
![Phillips-Fillister-Head-Machine-Screw Phillips fillister head machine screw parts diagram](https://optimas.com/wp-content/uploads/2022/09/Phillips-Fillister-Head-Machine-Screw.jpg)
![phillips fillister head screws2 Phillips fillister head machine screws](https://optimas.com/wp-content/uploads/2022/08/phillips-fillister-head-screws2-300x237.png)
Phillips Fillister Head Machine Screws
THREAD SIZE | #4 | #5 | #6 | #8 | #10 | 1/4" | 5/16" | 3/8" | 7/16" | 1/2" | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
THREAD PITCH | 40 UNC | 48 UNF | 40 UNC | 44 UNF | 32 UNC | 40 UNF | 32 UNC | 36 UNF | 24 UNC | 32 UNF | 20 UNC | 28 UNF | 18 UNC | 24 UNF | 16 UNC | 24 UNF | 14 UNC | 20 UNF | 13 UNC | 20 UNF |
HEAD DIAMETER | .166/.183 | .187/.205 | .208/.226 | .250/.270 | .292/.313 | .389/.414 | .490/.518 | .590/.622 | .589/.625 | .710/.750 | ||||||||||
HEAD HEIGHT | .088/.107 | .100/.120 | .111/.132 | .133/.56 | .156/.180 | .207/.237 | .262/.295 | .315/.355 | .321/.368 | .362/.412 | ||||||||||
HEAD SIDE HEIGHT | .069/.079 | .078/.088 | .086/.096 | .102/.113 | .118/.130 | .155/.170 | .194/.211 | .233/.253 | .242/.265 | .273/.297 | ||||||||||
THREAD LENGTH | Fully threaded up to 1-1/8” included. Longer lengths are 1” min. thread length. | Fully threaded up to 2” included. Longer lengths are 1-1/2” min. thread length. | ||||||||||||||||||
DRIVER SIZE | 1 | 2 | 3 | 4 | ||||||||||||||||
1/8 - 1/2 (Lengths) | –.02 (Length Tolerance) | –.03 (Length Tolerance) | ||||||||||||||||||
5/8 - 1 (Lengths) | –.03 (Length Tolerance) | –.03 (Length Tolerance) | ||||||||||||||||||
1-1/8 - 2 (Lengths) | –.03 (Length Tolerance) | |||||||||||||||||||
2-1/4 - Over 6 (Lengths) | –.03 (Length Tolerance) |
Phillips Oval Head Machine Screw
![Phillips-Oval-Head-Machine-Screws Phillips Oval Head Machine Screw Dimensions](https://optimas.com/wp-content/uploads/2022/09/Phillips-Oval-Head-Machine-Screws.jpg)
![Phillips Oval Head._greyscale wf shadow2 Phillips Oval Head Machine Screw](https://optimas.com/wp-content/uploads/2022/09/Phillips-Oval-Head._greyscale-wf-shadow2-300x178.png)
Phillips Oval Head Machine Screws
THREAD SIZE | #4 | #5 | #6 | #8 | #10 | 1/4" | 5/16" | 3/8" | 7/16" | 1/2" | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
THREAD PITCH | 40 UNC | 48 UNF | 40 UNC | 44 UNF | 32 UNC | 40 UNF | 32 UNC | 36 UNF | 24 UNC | 32 UNF | 20 UNC | 28 UNF | 18 UNC | 24 UNF | 16 UNC | 24 UNF | 14 UNC | 20 UNF | 13 UNC | 20 UNF |
HEAD DIAMETER | .191/.212 | .215/.237 | .238/.262 | .285/.312 | .333/.362 | .442/.477 | .556/.597 | .670/.717 | .715/.760 | .765/.813 | ||||||||||
HEAD HEIGHT | .067 ref | .075 ref | .083 ref | .100 ref | .116 ref | .153 ref | .191 ref | .230 ref | .223 ref | .223 ref | ||||||||||
ANGLE | 80°/82° | |||||||||||||||||||
HEAD HEIGHT | .037 ref | .041 ref | .045 ref | .052 ref | .060 ref | .079 ref | .099 ref | .117 ref | .122 ref | .131 ref | ||||||||||
THREAD LENGTH | Fully threaded up to 1-1/8” included. Longer lengths are 1” min. thread length. | Fully threaded up to 1-1/8” included. Longer lengths are 1” min. thread length. | ||||||||||||||||||
DRIVER SIZE | 1 | 2 | 3 | 4 | ||||||||||||||||
1/8 - 1/2 (Lengths) | –.02 (Length Tolerance) | –.03 (Length Tolerance) | ||||||||||||||||||
5/8 - 1 (Lengths) | –.03 (Length Tolerance) | –.03 (Length Tolerance) | ||||||||||||||||||
1-1/8 - 2 (Lengths) | –.03 (Length Tolerance) | |||||||||||||||||||
2-1/4 - Over 6 (Lengths) | –.03 (Length Tolerance) |
Phillips Pan Head Machine Screw
![Panhead-Maching-Screw Panhead Machine Screw Dimensions](https://optimas.com/wp-content/uploads/2022/09/Panhead-Maching-Screw.jpg)
![Phillips Pan Head Screw Phillips Pan Head Screw](https://optimas.com/wp-content/uploads/2022/09/Phillips-Pan-Head-Screw-300x241.png)
Phillips Pan Head Machine Screws
THREAD SIZE | #4 | #5 | #6 | #8 | #10 | 1/4" | 5/16" | 3/8" | 7/16" | 1/2" | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
THREAD PITCH | 40 UNC | 48 UNF | 40 UNC | 44 UNF | 32 UNC | 40 UNF | 32 UNC | 36 UNF | 24 UNC | 32 UNF | 20 UNC | 28 UNF | 18 UNC | 24 UNF | 16 UNC | 24 UNF | 14 UNC | 20 UNF | 13 UNC | 20 UNF |
HEAD DIAMETER | .205/.219 | .205/.219 | .205/.219 | .205/.219 | .205/.219 | .205/.219 | .205/.219 | .205/.219 | .205/.219 | .205/.219 | ||||||||||
HEAD HEIGHT | .205/.219 | .205/.219 | .205/.219 | .205/.219 | .205/.219 | .205/.219 | .205/.219 | .205/.219 | .205/.219 | .205/.219 | ||||||||||
THREAD LENGTH | Fully threaded up to 1-1/8” included. Longer lengths are 1” min. thread length. | Fully threaded up to 1-1/8” included. Longer lengths are 1” min. thread length. | ||||||||||||||||||
DRIVER SIZE | 1 | 2 | 3 | 4 | ||||||||||||||||
1/8 - 1/2 (Lengths) | –.02 (Length Tolerance) | –.03 (Length Tolerance) | ||||||||||||||||||
5/8 - 1 (Lengths) | –.03 (Length Tolerance) | –.03 (Length Tolerance) | ||||||||||||||||||
1-1/8 - 2 (Lengths) | –.03 (Length Tolerance) | |||||||||||||||||||
2-1/4 - Over 6 (Lengths) | –.03 (Length Tolerance) |
Phillips Truss Head Machine Screw
![Phillips-Truss-Head-Machine-Screws Phillips Truss Head Machine Screw dimensions](https://optimas.com/wp-content/uploads/2022/09/Phillips-Truss-Head-Machine-Screws.jpg)
![Phillips Truss Head_wf shadow Phillips Truss Head Screw](https://optimas.com/wp-content/uploads/2022/09/Phillips-Truss-Head_wf-shadow-300x250.png)
Phillips Truss Head Machine Screws
THREAD SIZE | #4 | #5 | #6 | #8 | #10 | 1/4" | 5/16" | 3/8" | 7/16" | 1/2" | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
THREAD PITCH | 40 UNC | 48 UNF | 40 UNC | 44 UNF | 32 UNC | 40 UNF | 32 UNC | 36 UNF | 24 UNC | 32 UNF | 20 UNC | 28 UNF | 18 UNC | 24 UNF | 16 UNC | 24 UNF | 14 UNC | 20 UNF | 13 UNC | 20 UNF |
HEAD DIAMETER | .241/.257 | .272/.289 | .303/.321 | .364/.384 | .425/.448 | .546/.573 | .666/.698 | .787/.823 | .907/.948 | 1.028/1.07 | ||||||||||
HEAD HEIGHT | .059/.069 | .066/.078 | .074/.086 | .088/.102 | .103/.118 | .133/.150 | .162/.183 | .191/.215 | .221/.248 | .250/.280 | ||||||||||
THREAD LENGTH | Fully threaded up to 1-1/8” included. Longer lengths are 1” min. thread length. | Fully threaded up to 2” included. Longer lengths are 1-1/2” min. thread length. | ||||||||||||||||||
DRIVER SIZE | 1 | 2 | 3 | 4 | ||||||||||||||||
1/8 - 1/2 (Lengths) | –.02 (Length Tolerance) | –.03 (Length Tolerance) | ||||||||||||||||||
5/8 - 1 (Lengths) | –.03 (Length Tolerance) | –.03 (Length Tolerance) | ||||||||||||||||||
1-1/8 - 2 (Lengths) | –.03 (Length Tolerance) | |||||||||||||||||||
2-1/4 - Over 6 (Lengths) | –.03 (Length Tolerance) |
Get a Technical Consult
For more information on Phillips machine screws or any type of fastener, contact our experts at optimas.com/contact.